English 
Chinese 
Russian 
Spanish 
German 
Arabic 
French 
Portuguese 
Italian 
Ukrainian PRODUCT
Portable Gantry Plasma and Flame Dual-purpose CNC Metal Plate Cutting Machine 2500*6000
- working area
The standard effective working area is 1500*3000mm, other dimensions can be customized
- Flame cutting thickness
6 – 160mm, suitable for cutting thick steel plates
- Plasma Cutting Thickness
Depending on the plasma power you use, the greater
the plasma power source is, the thicker the thickness of the steel plate that can be cut.
Recommended plasma power source could be 60A, 100A, 120A, 160A. It is suitable for cutting thin plates with fast cutting speed
- CNC operating system
common edge cutting system, supports batch cutting, saves time and materials， very cost effective
- Precision cast heavy rail
The hard aluminum alloy is integrally formed, and the optical axis is chrome Plated, which is wear-resistant and does not deform, ensuring the smoothness and precision of the track operation
Share:
Description
| Model | HFT-1530 / 2560A |
| Effective cutting area | 1500*3000mm 2500*6000mm |
| Cutting speed (mm/min) | 50-4000(max. 4000) |
| Input power source | 380V±10% VAC,50/60HZ Three phase |
| Machine body | 220V±10%V AC, 50/60HZ Single phase |
| Flame cutting specification (for Oxy-fuel Cutting) | |
| Flame Cutting thickness (mm) | 1-80 (Oxygen + acetylene or propane) |
| Torch height controller | flame, height adjustment(±60mm) |
| Flame cutting gas | Oxygen+ propane or acetylene |
| Cutting torch | flame cutting torch |
| Plasma cutting specification (for Plasma Cutting) | |
| Plasma Cutting thickness (mm) | 0-30mm (according to plasma power source) |
| Torch height controller | Plasma, Arc voltage height (THC) |
| Plasma cutting gas | compressed air |
| Cutting torch | 8m fine plasma torch |
| controller system | FL2100B |
| Motor | Stepper motor |
| Operation | ±0.2mm/m |
| Guide length ×guide width ×guide thickness (mm) | 3500×273×60 |
| Nesting software | StarCAM |
| Gas pressure (Mpa) | ±0.5 |
| Cutting Conversion Kit | Flame cutting and plasma cutting can change easily. Flame cutting machine add power source, ARC, plasma torch to change into plasma cutting machine |
